Daedong Kioti RX6020 Скачать руководство пользователя страница 10

Страница: 10 / 262

SAFeTY AND vehICLe DAmAGe WARNING

This manual includes information titled as

WARNING, CAUTION, ImPORTANT

and

NOTe.

These titles indicate the following:

NOTe

This indicates that interesting or helpful information is being pro

vided.

WARNING

This indicates that a condition may result in harm, serious

injury or death to you or other persons if the warning is not

heeded. Follow the advice provided with the warning.

This indicates that a condition may result in damage to your

vehicle or its equipment if the caution is not heeded. Follow

the advice provided with the caution.

This mark indicates emphasis on notable characteristics of

working procedures, and information about technology for

easier operation.

ImPORTANT

CAUTION

TF110(RX7320)ROPS합본-US,EU,AU-00.10 10

2016-06-07 오후 6:55:21

Содержание Kioti RX6020







































































































































































































































































Результаты поиска

Содержание Kioti RX6020

Отзывы:

Daedong Kioti RX6020, Руководство пользователя, Страница: 10 / 262

Результаты поиска

Содержание Kioti RX6020

Отзывы: