Daedong Kioti RX6020, Руководство пользователя, Страница: 146 / 262

5
-
RX6020 / RX6620 / RX7320 / RX7620
operating principle of auto pre-
heating system.

The glow plug lamp comes on
for 8 seconds and then goes off
when the key switch is turned to
the "Start" or "Stop" position.
The engine should be started
within 5 seconds after the glow
plug lamp goes off. After the en-
gine is started, post-heat is per-
formed for 15 seconds with the
key switch in the "oN" position.

The post-heating is a function to
keep the glow plugs activated
for approx. 15 seconds after
the engine is started in order to
enhance the engine combus-
tion performance and to reduce
harmful emissions right after en-
gine start.
NOTE
warning lamps come on when the
key is in "oN" position before the
engine start.
10. When the engine is started, re-
lease the key. Then, the key is
automatically turned back to the
"oN" position.
11. Warm up the engine for 3 to 4
minutes (10 minutes in winter)
after releasing the clutch pedal.

Never operate the start motor
for more than 10 consecu-
tive seconds as it consumes
an excess of battery power. If
the engine cannot be started
within 10 seconds, wait for 30
seconds and try again.

Never try to crank while the
engine is running.
WARNING
(1) Engine Check lamp
(2) Engine oil pressure Warning lamp
(3) Charge Warning lamp
12. Check to see that all the warning
lamps on the instrument cluster
turn "oFF".
If any lamp remains on, immediately
stop the engine and determine the
cause.
T11O512A
TF110(RX7320)ROPS합본-US,EU,AU-05.6 6 2016-06-07 오후 7:20:25