manualshive.com logo in svg

Daedong Kioti RX6020, Руководство пользователя, Страница: 191 / 262

Поделиться
Скачать
Daedong Kioti RX6020 Скачать руководство пользователя страница 191

7

-

maintenance

7

sERVICE sChEDUlE

MAINTENANCE  

CODEs

ITEM

sERVICE REQUIRED

engine oil

Check the oil level and add as needed. Do not overfill.

e

hydraulic (trans / Diff.) fluid

check level and add as needed.

D

engine air filter and air in-

take system

check for leaks and damaged components. Do not use compressed air to clean 

elements.

t

engine cooling system

clean debris from oil cooler, radiator screen and grills. check coolant level cold, 

add premixed coolant as needed.

f, g, ac

seat Belt

check the condition of seat belt and mounting hardware. repair or replace as needed.

tires

check for wear, damaged tires and ensure for proper sized tires and correct air pressure.

parking Brake

check operation and adjust if required.

clean pedals

clean brake pedals, travel control pedal, clutch pedal and footrest area.

h

general items

check for loose or broken parts, damaged operator cab, instrument operation, 

loose wheel nuts / bolts, oil leaks and damaged or missing signs (decals).      

q, ag, ah, am

pto

inspect the splines. replaced damaged or missing shields and guards.

three-point linkage

check operation and condition of pins, links and bars.

loader (if equipped)

check mounting hardware for loose or broken parts.  

MAINTENANCE ChECk lIsT

DAIly ChECk ChART

※

  for detailed information about maintenance codes, refer to the corresponding section in each chapter.

TF110(RX7320)ROPS합본-US,EU,AU-07.3   3

2016-05-10   오전 8:50:43

Содержание Kioti RX6020







































































































































































































































































Отзывы:

Нет отзывов