DAB NOVA 180, Быстрое руководство

Страница: 14 / 34

ENGLISH
8
CONTENTS pag.
1. INTRODUCTION 8
2. STORAGE 8
3. TRANSPORT 8
4. WEIGHTS 8
5. WARNINGS 8
6. RESPONSIBILITY 9
7. PRECAUTIONS FOR THE BATTERY HOUSED IN THE CONTROL UNIT 9
8 USE IN PARTICULAR ENVIRONMENTAL CONDITIONS 9
9 TECHNICAL DATA 9
10 KEY 9
11 CHARACTERISTICS AND INTERPRETATIONS 10
12 SWITCHING ON AND MAINTENANCE 10
13 TROUBLE-SHOOTING 10
1. INTRODUCTION
This documentation provides general indications for the storage, installation and use of the electronic control
units CONTROL AS1-E. The device has been designed and made to control a luminous and acoustic alarm
for the maximum water level, even in the absence of the supply voltage.
2. STORAGE
A long period of inactivity in precarious storage conditions may cause damage to the equipment and thus
cause risk to the personnel in charge of installation, control and maintenance.
First of all it is good practice to ensure that the control panel is correctly stored, scrupulously observing the
following indications:

the electric panel must be kept in a completely dry place, far from sources of heat;

it must be perfectly closed and insulated from the outside environment, so as to prevent insects, damp and
dust from getting in and damaging the electric components, to the detriment of their regular operation.
3. TRANSPORT
Avoid subjecting the products to needless jolts or collisions. Ensure that the panel is kept in its original
packaging during transport, until the time of installation.
4. WEIGHTS
The adhesive label on the package indicates the total weight of the control panel.
5. WARNINGS
5.1
Read this documentation carefully before installation.
It is indispensable to have the electric system and connections made by skilled personnel,
in possession of the technical qualifications indicated by the safety standards concerning the
design, installation and maintenance of technical plants, in force in the country where the
product is to be installed.
Failure to comply with the safety regulations not only causes risk to personal safety and
damage to the equipment, but invalidates every right to assistance under guarantee.
5.2 The term skilled personnel means persons whose training, experience and instruction, as
well as their knowledge of the respective standards and requirements for accident prevention
and working conditions, have been approved by the person in charge of plant safety,
authorizing them to perform all the necessary activities, during which they are able to
recognize and avoid all dangers. (Definition for technical personnel IEC 364).
5.3 Check that no damage has been done during transport or storage. In particular, ensure that
the external casing is perfectly entire and in excellent condition; all the internal parts
(components, leads, etc.) must be completely free from traces of damp, oxide or dirt. If
necessary, clean carefully and check the efficiency of all the components in the control unit;
replace any parts that are not perfectly efficient. It is indispensable to ensure that all the
leads are correctly secured to their terminals. In the event of long storage (or in the event
of replacement of any part) it is advisable to carry out on the panel all the tests indicated by
standards EN 60204-1.