ENGLISH
13
Failure to observe the warnings may create situations of risk for persons or property and will void the product guarantee.
Particular warnings
Always switch off the mains power supply before working on the electrical or mechanical part of the system.
Only firmly
cabled mains connections are admissible. The appliance must be earthed (IEC 536 class 1, NEC and other applicable
standards
)
.
Mains terminals and motor terminals may still have dangerous voltage when the motor is stopped.
The appliance may only be used for the functions for which it was designed.
Under certain calibration conditions, the converter can start automatically after a power failure.
RESPONSIBILITY
The Manufacturer does not vouch for correct operation of the electropumps or answer for any damage that they may cause if they
have been tampered with, modified and/or run outside the recommended work range or in contrast with other indications given in this
manual
.
The Manufacturer declines all responsibility for possible errors in this instructions manual, if due to misprints or errors in copying. The
Manufacturer reserves the right to make any modifications to the products that it may consider necessary or useful, without affecting their
essential characteristics.
who lack experience or knowledge, on condition that they are under supervision or after they have received instructions
concerning the safe use of the appliance and the understanding of the dangers involved. Children must not play with the
appliance. Cleaning and maintenance intended to be carried out by the user must not be performed by children without
supervision.
Overload protection. The pump is equipped with a thermal motor protector. If the motor overheats, the motor protector switches
the pump off automatically. The cooling time is about 15-20 min. after which the pump automatically switches on again. After
the motor protector has tripped, it is absolutely necessary to find the cause and eliminate it. See Troubleshooting.
The power supply cable and the float switch must never be used to carry or lift the pump. Always use the pump handle.
Use is allowed only if the electric system is in possession of safety precautions in accordance with the regulations in force in the
country where the product is installed (for Italy CEI64/2).
Never pull on the cable to detach the plug from the socket.
If the power cable is damaged, it must be replaced by the manufacturer or by their authorised technical assistance service, so as
to avoid any risk.
Содержание DTron 3
Страница 1: ...Fig Fig Image Abb Afb Fig Obr Kuva Fig Fig ekil Rys bra Fig Fig 1 Fig 2 Fig 3 Fig 5...
Страница 2: ...Fig 6 Fig 7 Fig 8 Fig 9...
Страница 3: ...Fig 10 Fig 11 Fig 12...
