D-Link xStack DGS-3120 Series, Справочное руководство

Страница: 262 / 509

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
252
Figure 5-146 Route Map Settings - View Detail window
The fields that can be configured are described below:
Parameter Description
Sequence ID (1-
65535) Enter the sequence number for the rule.
Direction
Use the drop-down menu to Permit or Deny the matched rule.
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Delete All button to remove all the entries listed.
Click the Edit button under Match Clause or Set Clause to configure the clause.
Click the Delete button to remove the specific entry.
Click the Edit button under Match Clause to see the following window.
Figure 5-147 Route Map Settings - Match Clause window
The fields that can be configured are described below:
Parameter Description
Action Use the drop-down menu to Add or Delete a sequence entry.
IP Address List
Click the radio button and specify to match the route according to the access list.
Next Hop List Click the radio button and specify to match the next hop of the route according to the
prefix list.
Metric
(0-4294967294) Click the radio button and specify to match the metric of the route.
Route Type Select the route type used here. Options to choose from are Internal , External , Type_1 ,
and Type_2 .
Interface Name Enter the interface name used here.