manualshive.com logo in svg

D-Link xStack DGS-3120 Series, Справочное руководство

Серия коммутаторов D-Link xStack DGS-3120 предлагает мощные и надежные решения для сетей любого уровня сложности. На нашем сайте вы можете бесплатно загрузить руководство по использованию и настройке в формате Cli Reference Manual. Узнайте больше на manualshive.com!

Поделиться
Скачать
background image

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide 

177 

 

 

Figure 5-27 IP Tunnel GRE Settings (Edit) window 

 

The fields that can be configured are described below: 

Parameter 

Description 

Network Address 

Enter the IPv4 network address assigned to the GRE tunnel interface. IPv4 processing 
will be enabled on the IPv4 tunnel interface when an IPv4 address is configured. This 
IPv4 address is not connected with the tunnel source or destination IPv4 address. 

IPv6 Address/Prefix 
Length 

Enter the IPv6 network address assigned to the GRE tunnel interface. IPv6 processing 
will be enabled on the IPv6 tunnel interface when an IPv6 address is configured. This 
IPv6 address is not connected with the tunnel source or destination IPv4 address. 

Source IPv4 Address 

Click the radio button and enter the source IPv4 address of the GRE tunnel interface. It 
is used as the source address for packets in the tunnel.  

Source IPv6 Address 

Click the radio button and enter the source IPv6 address of the GRE tunnel interface. It 
is used as the source address for packets in the tunnel. 

Destination IPv4 
Address 

Click the radio button and enter the destination IPv4 address of the GRE tunnel 
interface. It is used as the destination address for packets in the tunnel.  

Destination IPv6 
Address 

Click the radio button and enter the destination IPv6 address of the GRE tunnel 
interface. It is used as the destination address for packets in the tunnel. 

Click the 

<<Back

 button to return to the previous window. 

Click the 

Apply

 button to accept the changes made for each individual section. 

 

OSPF (RI Mode Only) 

The Open Shortest Path First (OSPF) routing protocol uses a link-state algorithm to determine routes to network 
destinations. A “link” is an interface on a router and the “state” is a description of that interface and its relationship 
to neighboring routers. The state contains information such as the IP address, subnet mask, type of network the 
interface is attached to, other routers attached to the network, etc. The collection of link-states is then collected in a 
link-state database that is maintained by routers running OSPF. 

 

OSPF specifies how routers will communicate to maintain their link-state database and defines several concepts 
about the topology of networks that use OSPF. 

 

To limit the extent of link-state update traffic between routers, OSPF defines the concept of Area. All routers within 
an area share the exact same link-state database, and a change to this database once one router triggers an 
update to the link-state database of all other routers in that area. Routers that have interfaces connected to more 
than one area are called Border Routers and take the responsibility of distributing routing information between 
areas. 

 

One area is defined as Area 0 or the Backbone. This area is central to the rest of the network in that all other areas 
have a connection (through a router) to the backbone. Only routers have connections to the backbone and OSPF is 
structured such that routing information changes in other areas will be introduced into the backbone, and then 
propagated to the rest of the network. 

Содержание xStack DGS-3120 Series






























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3120 Series

D-Box HaptiSync Hub User Manual preview
HaptiSync Hub
Бренд: D-Box Страницы: 27
SIMON RWA HE 083 Brief Instruction preview
HE 083
Бренд: SIMON RWA Страницы: 3
Oase Underwater Switch 24V DC/DMX/02 Operating Instructions Manual preview
Underwater Switch 24V DC/DMX/02
Бренд: Oase Страницы: 40
Cudy GS1016 Quick Installation Manual preview
GS1016
Бренд: Cudy Страницы: 2
Waters Network Systems GS1016 Operating Manual preview
GS1016
Бренд: Waters Network Systems Страницы: 12
Synology NEXT-POE4210L2S-TP Quick Installation And Initial Configuration preview
NEXT-POE4210L2S-TP
Бренд: Synology Страницы: 15
Key Digital KD-MS4x4G-2 Manual preview
KD-MS4x4G-2
Бренд: Key Digital Страницы: 20
RONK VIGILANT VTS0400 Owners & Installation Manual preview
VIGILANT VTS0400
Бренд: RONK Страницы: 32
I-Tech NVCIP800 User Manual preview
NVCIP800
Бренд: I-Tech Страницы: 29
Comtech EF Data CRS-280 Installation And Operation Manual preview
CRS-280
Бренд: Comtech EF Data Страницы: 70
Eaton RMQ-Titan M22-LED Series Instruction Leaflet preview
RMQ-Titan M22-LED Series
Бренд: Eaton Страницы: 4
Microsens MS650850M Application preview
MS650850M
Бренд: Microsens Страницы: 8
J-Tech Digital JTD-3003 User Manual preview
JTD-3003
Бренд: J-Tech Digital Страницы: 13
Vanco Evolution EVMX4442 Manual preview
Evolution EVMX4442
Бренд: Vanco Страницы: 12
DANLERS ControlZAPP CZ CEFL 10VDC Installation Notes preview
ControlZAPP CZ CEFL 10VDC
Бренд: DANLERS Страницы: 2
ENSIM SENSORS DX-ELB 11 Operating Manual preview
DX-ELB 11
Бренд: ENSIM SENSORS Страницы: 15
Rasfox SF501 & 4K501 User Manual preview
SF501 & 4K501
Бренд: Rasfox Страницы: 13
Gefen DVI-444N User Manual preview
DVI-444N
Бренд: Gefen Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды