DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
132
Initializing Ports for MAC Based 802.1x
To initialize ports for the MAC side of 802.1x, the user must first enable 802.1x by MAC address in the
Advanced
Settings
window. Click
Configuration >
Port Access Entity > PAE System Control > Initialize Port(s)
to open the
following window:
Figure 6- 97. Initialize Ports (MAC based 802.1x)
To initialize ports, first choose the switch in the switch stack by using the
Unit
pull-down menu, then the range of ports in
the
From
and
To
field. Then the user must specify the MAC address to be initialized by entering it into the
MAC Address
field and checking the corresponding check box. To begin the initialization, click
Apply
.
NOTE:
The user must first globally enable 802.1X in the
802.1X Auth
Mode Settings
window before initializing ports. Information in the
Initialize Ports Table
cannot be viewed before enabling 802.1X.
Содержание TM DES-6500
