D-Link TM DES-6500, Руководство пользователя

Страница: 146 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
145
Static ARP Table
The Address Resolution Protocol ( ARP ) is a TCP/IP protocol that converts IP addresses into physical addresses. This table
allows network managers to view, define, modify and delete ARP information for specific devices.
Static entries can be defined in the ARP Table . When static entries are defined, a permanent entry is entered and is used to
translate IP address to MAC addresses.
To open the Static ARP Table open the Configuration folder, and then open the Layer 3 IP Networking folder and click
on the Static ARP Settings link.
Figure 6- 108. Static ARP Settings window
To add a new entry, click the Add button, revealing the following screen to configure:
Figure 6- 109. Static ARP Settings – Add window
To modify a current entry, click the corresponding Modify button of the entry to be modified, revealing the following
screen to configure:
Figure 6- 110. Static ARP Settings – Edit window
The following fields can be set or viewed:
Parameter Description
IP Address The IP address of the ARP entry. This field cannot be edited in the Static ARP
Settings – Edit window.
MAC Address The MAC address of the ARP entry.
After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To
completely clear the Static ARP Settings , click the Clear All button.