manualshive.com logo in svg

D-Link TM DES-6500, Руководство пользователя

D-Link TM DES-6500 - это сетевой коммутатор с расширенными функциями управления. Скачайте бесплатно Руководство по командной строке на manualshive.com для дополнительной информации о настройке и использовании этого устройства. Получите доступ к полному руководству в любое время для успешной работы с продуктом.

Поделиться
Скачать
background image

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual 

77 

VLAN if the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by Novell NetWare 802.3 (IPX - Internet Packet Exchange). 

ipx802dot2 - 

Using this parameter will instruct the Switch to forward packets to this 

VLAN if the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by Novell NetWare 802.2 (IPX - Internet Packet Exchange). 

ipxSnap 

- Using this parameter will instruct the Switch to forward packets to this VLAN if 

the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by Novell and the Sub Network Access Protocol (SNAP). 

ipxEthernet2 - 

Using this parameter will instruct the Switch to forward packets to this 

VLAN if the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by Novell Ethernet II Protocol. 

appleTalk 

- Using this parameter will instruct the Switch to forward packets to this VLAN 

if the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by the AppleTalk protocol. 

decLAT - 

Using this parameter will instruct the Switch to forward packets to this VLAN if 

the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by the Digital Equipment Corporation (DEC) Local Area Transport 
(LAT) protocol. 

sna802dot2 - 

Using this parameter will instruct the Switch to forward packets to this 

VLAN if the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by the Systems Network Architecture (SNA) 802.2 Protocol. 

snaEthernet2 - Using this parameter will instruct the Switch to forward packets to this 
VLAN if the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by the Systems Network Architecture (SNA) Ethernet II Protocol.

 

netBios - 

Using this parameter will instruct the Switch to forward packets to this VLAN if 

the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by the NetBIOS Protocol.

 

xns - 

Using this parameter will instruct the Switch to forward packets to this VLAN if the 

tag in the packet header is concurrent with this protocol. This packet header information 
is defined by the Xerox Network Systems (XNS) Protocol.

 

vines - 

Using this parameter will instruct the Switch to forward packets to this VLAN if 

the tag in the packet header is concurrent with this protocol. This packet header 
information is defined by the Banyan Virtual Integrated Network Service (VINES) 
Protocol.

 

ipV6 - 

Using this parameter will instruct the Switch to forward packets to this VLAN if the 

tag in the packet header is concurrent with this protocol. This packet header information 
is defined by the Internet Protocol Version 6 (IPv6) Protocol. 

userDefined - 

Using this parameter will instruct the Switch to forward packets to this 

VLAN if the tag in the packet header is concurrent with this protocol defined by the user. 
This packet header information is defined by entering the following information:

 

User Defined Pid

 - Specifies that the VLAN will only accept packets with this 

hexadecimal 802.1Q Ethernet type value in the packet header.

 

The user may define an 

entry, in the hexadecimal form (ffff) to define the packet identification. 

(The user only 

need enter the final four integers of the hexadecimal format to define the packet ID – 
{hex 0x0 0xffff}) 

This field is only operable if 

userDefined 

is selected in the Protocol ID 

field.  

encap [ethernet | llc | snap | all] 

– Specifies that the Switch will examine the octet of the 

packet header referring to one of the protocols listed (Ethernet, LLC or SNAP), looking 
for a match of the hexadecimal value previously entered . 

all 

will instruct the Switch to 

examine the total packet header. After a match is found, the Switch will forward the 
packet to this VLAN. This field is only operable if 

userDefined 

is selected in the Protocol 

ID field. 

Содержание TM DES-6500

































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TM DES-6500

3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Бренд: 3Com Страницы: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Бренд: 3Com Страницы: 26
Zonet ZEW1505 Quick Installation Manual preview
ZEW1505
Бренд: Zonet Страницы: 10
Samsung NAS Series Hardware User Manual preview
NAS Series
Бренд: Samsung Страницы: 65
QNAP TS-130-US User Manual preview
TS-130-US
Бренд: QNAP Страницы: 39
QUNDIS RNN5 Operating And Installation Instructions preview
RNN5
Бренд: QUNDIS Страницы: 42
ACTi GNR-310 Quick Installation Manual preview
GNR-310
Бренд: ACTi Страницы: 12
Federal Signal Corporation AR2000-M Installation And Maintenance Manual preview
AR2000-M
Бренд: Federal Signal Corporation Страницы: 49
F.F. Group RO 1600 PLU Original Instructions Manual preview
RO 1600 PLU
Бренд: F.F. Group Страницы: 56
NetComm Dynalink 3G8WV Setup Manual preview
Dynalink 3G8WV
Бренд: NetComm Страницы: 34
Gbord EN-203 User Manual preview
EN-203
Бренд: Gbord Страницы: 11
Tripp Lite SmartRack SR42UBEXPKD Assembly Instructions Manual preview
SmartRack SR42UBEXPKD
Бренд: Tripp Lite Страницы: 8
Eaton 9479-ETG-CSL Instruction Manual preview
9479-ETG-CSL
Бренд: Eaton Страницы: 32
Beckhoff CU8210-D001-0200 Manual preview
CU8210-D001-0200
Бренд: Beckhoff Страницы: 25
N-Tron 900B Installation & User Manual preview
900B
Бренд: N-Tron Страницы: 21
Zapp Z030 User Manual preview
Z030
Бренд: Zapp Страницы: 24
Bosch D9210B Operation And Installation Manual preview
D9210B
Бренд: Bosch Страницы: 28
Bosch DVRXEAP01 Installation Manual preview
DVRXEAP01
Бренд: Bosch Страницы: 44

Бренды по названию

Популярные бренды

Загрузить еще бренды