D-Link TM DES-6500, Руководство пользователя

Страница: 183 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
182
Parameter Description
DNS Relay Status This field can be toggled between Disabled and Enabled using the pull-down menu,
and is used to enable or disable the DNS Relay service on the Switch.
Primary Name Server Allows the entry of the IP address of a primary domain name server (DNS).
Secondary Name
Server Allows the entry of the IP address of a secondary domain name server (DNS).
DNSR Cache Status This can be toggled between Disabled and Enabled. This determines if a DNS cache
will be enabled on the Switch.
DNSR Static Table
State This field can be toggled using the pull-down menu between Disabled and Enabled.
This determines if the static DNS table will be used or not.
Click Apply to implement changes made.
DNS Relay Static Settings
To view the DNS Relay Static Settings , click Configuration > Layer 3 IP Networking > DNS Relay > DNS Relay
Static Settings , which will open the DNS Relay Static Settings window, as seen below:
Figure 6- 150. DNS Relay Static Settings and Table window
To add an entry into the DNS Relay Static Table , simply enter a Domain Name with its corresponding IP address and
click Add under the Apply heading. A successful entry will be presented in the table below, as shown in the example
above. To erase an entry from the table, click the corresponding of the entry you wish to delete.