D-Link DXS-3250E - xStack Switch, Руководство по установке в сети

Страница: 248 / 424

Configuring Multicast Forwarding
Defining Multicast Bridging Groups
Page 247
•
MAC Address Group — Multicast bridging is based on the packet’s VLAN and MAC address.
•
IP Address Group — Multicast bridging is based on the packet’s VLAN and MAC address for non-IPv4 pack-
ets, and on the packet’s VLAN and IPv4 destination address for IPv4 packets.
•
IP Source Group — Multicast bridging based on the packet’s VLAN and MAC address for non-IPv4 packets,
and on the packet’s VLAN, IPv4 destination address, and IPv4 source address for IPv4 packets.
•
Ports — Displays Port that can be added to a Multicast service.
The following list contains the IGMP port and LAG members management settings:
•
D — Dynamically joins ports/LAG to the Multicast group in the Current Row.
•
S — Attaches the port to the Multicast group as static member in the Static Row.The port/LAG has joined the
Multicast group statically in the Current Row.
•
F — Forbidden ports are not included the Multicast group, even if IGMP snooping designated the port to join
a Multicast group.
•
N — None. The port is not part of a Multicast group.
2. Define the fields.
3. Click . The multicast groups are defined, and the device is updated.
To add a Multicast Group:
1. Click Advanced Setup > Multicast Support > Bridge Multicast > Multicast Group .The Multicast Group
Page opens.
2. Click . The Add Multicast Group Page opens:
Figure 170:Add Multicast Group Page
3. Define the fields.
4. Click . The Multicast group is defined, and the device is updated.