D-Link DXS-1210 Series User Manual
75
Figure 4.126 – L3 Features > IPv6 Neighbor
Interface VLAN (1-4094):
Enter the VLAN ID of the IPv6 neighbor.
IPv6 Address:
Specifies the neighbor IPv6 address.
MAC Address:
Specifies the link layer MAC address.
Click the
Apply
button to save your settings.
Click
Find
to locate a specific entry based on the information entered.
Click
Clear
to clear the specified information entered in the fields.
Click
Clear all
to clear all the information entered in the fields.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
L3 Features > IPv6 Static/Default Route
The IPv6 Static/Default Route is used to configure the IPv6 static or default routes.
Figure 4.127 – L3 Features > IPv6 Static/Default Route
IPv6 Address/Prefix Length:
Enter the destination network for the route, or tick the
Defult Route
check box
to be assigned to the default route.
Interface VLAN (1-4094):
Enter
interface’s VLAN ID that will be associated with this route.
Next Hop IPv6 Address:
Enter the router’s next hop IPv6 address.
Backup State:
Select the backup state option here. Options to choose from are
Primary
, and
Backup
.
When the Primary option is selected, the route is specified as the primary route to the destination. When the
Backup option is selected, the route is specified as the backup route to the destination.
Click the
Apply
button to save your settings.
L3 Features > IPv6 Route Table
The IPv6 Route Table page is used to view and configure the IPv6 route table.
Содержание DXS-1210-10TS
Страница 1: ...User Manual DXS 1210 Series L2 10 Gigabit Ethernet Switch Series Rev A2...
Страница 25: ...D Link DXS 1210 Series User Manual 19 Figure 4 24 User Guide Micro Site...
Страница 134: ......
