D-Link DXS-1210 Series User Manual
65
Figure 4.105 – L2 Features > LLDP >LLDP Management Address List
Management Address:
Select IPv4, IPv6 or All address to be displayed. Click
Find
and the table will update
and display the values required.
Subtype:
Displays the managed address subtype (e.g. MAC or IPv4)
Address:
Displays the IP address.
IF Type:
Displays the IF Type.
OID:
Displays the SNMP OID.
Advertising Ports:
Displays the advertising ports.
L2 Features > LLDP > LLDP Basic TLVs Settings
This LLDP Basic TLVs Settings page allows you to configure the LLDP Port settings.
Figure 4.106 – L2 Features > LLDP > LLDP Basic TLVs Settings
From Port / To Port:
Select the range of ports to be configured.
Port Description:
Select to enable or disable the Port Description option.
System Name:
Select the system name to be enabled or disabled in the LLDP port. If enabled is selected,
users can specify the content of the system Name.
System Description:
Select to enable or disable the System Description option.
System Capabilities:
Select to enable or disable the System Capabilities option.
Click
Apply
to accept the changes made.
L2 Features > LLDP > LLDP Dot1 TLVs Settings
This LLDP Dot1 TLVs Settings page allows you to configure an individual port or group of ports to exclude
one or more of the IEEE 802.1 organizational port VLAN ID TLV data types from outbound LLDP
advertisements.
Содержание DXS-1210-10TS
Страница 1: ...User Manual DXS 1210 Series L2 10 Gigabit Ethernet Switch Series Rev A2...
Страница 25: ...D Link DXS 1210 Series User Manual 19 Figure 4 24 User Guide Micro Site...
Страница 134: ......
