D-Link DXS-1210 Series User Manual
42
Ingress Checking:
Select
to enable or disable the ingress checking function.
Native VLAN:
Tick the option to enable the native VLAN function.
VID (1-4094):
After ticking the
Native VLAN
check box, this option will be available.
Enter
the VLAN ID used
for this configuration. This value must be between 1 and 4094.
Action:
Select the action that will be taken here. Options to choose from are
Add, Remove, Tagged,
and
Untagged.
Add Mode:
Select whether to add an
Untagged
or
Tagged
parameters.
Allowed VLAN Range:
Enter the allowed VLAN range information.
Clone:
Tick the
Clone
check box to copy the configuration to specified ports.
From Port / To Port:
Copy the configuration of VLAN interface for specified port ranges.
Click the
Apply
button to save your settings.
Click the
Back
button to return to the previous page.
L2 Features > Auto Surveillance VLAN > Auto Surveillance Properties
The Auto Surveillance Properties page is used to configure the auto surveillance VLAN global settings and
display the ports surveillance VLAN information.
Figure 4.68 – L2 Features > Auto Surveillance VLAN > Auto Surveillance Properties
Global Settings:
Surveillance VLAN: Specify to enable or disable the surveillance VLAN state.
Surveillance VLAN ID:
Enter the surveillance VLAN ID. The range is from 1 to 4094.
Surveillance VLAN CoS:
Specify the priority of the surveillance VLAN from 0 to 7.
Aging Time:
Specify the aging time of the surveillance VLAN. The range is from 1 to 65535 minutes. The
default value is 720 minutes. The aging time is used to remove a port from surveillance VLAN if the port is an
automatic surveillance VLAN member. When the last surveillance device stops sending traffic and the MAC
address of this surveillance device is aged out, the surveillance VLAN aging timer will be started. The port
will be removed from the surveillance VLAN after expiration of surveillance VLAN aging timer. If the
surveillance traffic resumes during the aging time, the aging counter will be reset and the timer will stop.
Click the
Apply
button to save your settings.
Содержание DXS-1210-10TS
Страница 1: ...User Manual DXS 1210 Series L2 10 Gigabit Ethernet Switch Series Rev A2...
Страница 25: ...D Link DXS 1210 Series User Manual 19 Figure 4 24 User Guide Micro Site...
Страница 134: ......
