D-Link DXS-1210 Series User Manual
37
Management > Session Timeout
The Session Timeout page allows you to configure the session timeout on the Switch.
Figure 4.56 – Management > Session Timeout
Web Session Timeout (60-36000):
Enter
the time in seconds of the web session timeout. Tick the
Default
check box.
Console Session Timeout (0-1439):
Enter
the time in minutes of the Console session timeout. Tick the
Default
check box to return to the default setting. The value is from 0 to 1439 minutes. 0 means never
timeout. The default value is 30 minutes.
Telnet Session Timeout (0-1439):
Enter
the time in minutes of the Telnet session timeout. Tick the
Default
check box to return to the default setting. The value is from 0 to 1439 minutes. 0 means never timeout. The
default value is 30 minutes.
Click the
Apply
button to save your settings.
Management > D-Link Discover Protocol Settings
The D-Link Discover Protocol Settings page allows you to configure and display D-Link Discovery Protocol
(DDP).
Figure 4.57 – Management > D-Link Discover Protocol Settings
D-Link Discovery Protocol State:
Enter
the enable or disable the D-Link Discovery Protocol state.
Report Timer:
Specify the interval in seconds between two consecutive DDP report messages. Options to
choose from are
30
,
60
,
90
,
120
, and
Never
.
DDP Port Settings:
From Port / To Port:
Enter
the appropriate port range used for the configuration.
State:
Select to enable or disable the DDP port state.
Click the
Apply
button to save your settings.
Содержание DXS-1210-10TS
Страница 1: ...User Manual DXS 1210 Series L2 10 Gigabit Ethernet Switch Series Rev A2...
Страница 25: ...D Link DXS 1210 Series User Manual 19 Figure 4 24 User Guide Micro Site...
Страница 134: ......
