D-Link DXS-1210 Series User Manual
34
AuthNoPriv
– Select to require authorization, but with no encryption of packets sent between the
Switch and a remote SNMP manager.
AuthPriv
– Select to require authorization, and packets sent between the Switch and a remote
SNMP manger will be encrypted.
UDP Port (0-65535):
Enter the UDP port number. The default trap UDP port number is 162. The range of
UDP port numbers is from 0 to 65535.
NOTE:
Some port numbers may conflict with other
protocols.
Community String / SNMPv3 User Name:
Enter the community string to be sent with the notification packet.
Click
Add
to create a new SNMP host,
Delete
to remove an existing host.
Management > RMON > RMON Global Settings
You can enable and disable remote monitoring (RMON) status for the SNMP function on the Switch. In
addition, RMON Rising and Falling Alarm Traps can be enabled and disabled.
Figure 4.50 – Management > RMON > RMON Global Settings
Management > RMON > RMON Statistics Settings
The RMON Statistics Settings page displays RMON Ethernet statistics and allows you to configure the
settings.
Figure 4.51 – Management > RMON > RMON Statistics Settings
The RMON Ethernet Statistics Configuration contains the following fields:
Port:
Select the port from which the RMON information was taken.
Index (1 - 65535):
Indicates the RMON Ethernet Statistics entry number.
Owner:
Displays the RMON station or user that requested the RMON information.
Click
Add
to activate your entry or click to renew the details collected and displayed.
Management > RMON > RMON History Settings
The RMON History Settings page contains information about samples of data taken from ports, such as
interface definitions or polling periods.
Figure 4.52 – Management > RMON > RMON History Settings
Содержание DXS-1210-10TS
Страница 1: ...User Manual DXS 1210 Series L2 10 Gigabit Ethernet Switch Series Rev A2...
Страница 25: ...D Link DXS 1210 Series User Manual 19 Figure 4 24 User Guide Micro Site...
Страница 134: ......
