D-Link DXS-1210 Series User Manual
36
Figure 4.54 – Management > RMON > RMON Event Settings
The RMON Events Page contains the following fields:
Index (1~ 65535):
Enter the event index.
Description:
Enter an event description.
Type:
Select the event type. The possible values are:
None –
Indicates that no event occurred.
Log –
Indicates that the event is a log entry.
SNMP Trap –
Indicates that the event is a trap.
Log and Trap –
Indicates that the event is both a log entry and a trap.
Community:
Enter the community to which the event belongs.
Owner:
Enter the time that the event occurred.
Click
Add
to add a new RMON event.
Management > Telnet/Web
The Telnet/Web page allows you to configure Telnet and Web settings on the Switch.
Figure 4.55 – Management > Telnet/Web
Telnet Settings:
Telnet State:
Select to enable or disable the configuration through Telnet.
Port (1-65535):
Enter the TCP port number used for Telnet management of the Switch. The standard TCP
port for the Telnet protocol is 23.
Click
Apply
to save your settings.
Web Settings:
Web State:
Select to enable or disable Web-based configuration.
Port (1-65535):
Enter the TCP port number used for Telnet management of the Switch. The standard TCP
port for the HTTP protocol is 80.
Click the
Apply
button to save your settings.
Содержание DXS-1210-10TS
Страница 1: ...User Manual DXS 1210 Series L2 10 Gigabit Ethernet Switch Series Rev A2...
Страница 25: ...D Link DXS 1210 Series User Manual 19 Figure 4 24 User Guide Micro Site...
Страница 134: ......
