D-Link DVX-000MS User Manual
Section - Installation
You can remove a phone from the Response Point
™
phone system. You may want to do this if the phone is no longer
working, for example. Removing a phone does not change the settings on the phone itself; however, the base unit will
no longer recognize it, and it must be reconfigured if you add it to the phone system again.
If you just want to move a phone to another location, do not remove the phone through Administrator; just unplug it
instead. When the phone is unplugged, the base unit reports that it is no longer responding and flags it on the Phone
System page of Administrator. However, the phone configuration is maintained by the base unit so that when it is
plugged back in, the phone is registered with the base unit as before. No additional configuration is needed.
To remove a phone:
1. Click the
Phone System
button.
2. In the
Tasks
panel, click
Remove Phone
.
3. Click the phone you want to remove, and then click
OK
.
4. Confirm that you want to remove the phone you selected by clicking
Yes
in the message box.
Removing a Phone
Содержание DVG-3104MS - VoiceCenter PSTN Gateway
Страница 1: ......