1
D-Link DVX-000MS User Manual
Section - Installation
Configuring Park Music
Music helps add a professional touch while filling the silence for callers waiting in park. Using a custom feed, you can
broadcast the music you prefer, promotional materials, or other important messages you want callers to hear. Attach
a cable from an analog audio source—such as a radio, CD player, or other sound device—to the audio jack on the
base unit, typically a “line-in” or “mic-in” jack. A custom feed plays on a continuous cycle, without a definite beginning
or ending. When you park a call, the caller will hear the audio file from where it’s currently playing, not from where the
audio file begins. Therefore, callers waiting in park hear the same thing at the same time.
Note:
If your hardware doesn’t have analog jack, you will only be able to configure the default audio file.
To configure the built-in audio file
• Click Play the default music.
To configure a custom audio file
1. Use a cable to connect your radio, CD player, or other sound device to the analog jack on the base unit.
2. Click
Play input connected to the audio jack on the base unit.
3. In the Input list, click Mono or Stereo, depending on the sound device you’re using. (Radios are usually mono; CD
players are usually stereo.)
4. In the
Volume list
, adjust the setting to the appropriate level.
Note:
To prevent distortion and improve the signal-to-noise ratio of the incoming audio, adjust the volume on the analog
audio source to a medium setting.
Содержание DVG-3104MS - VoiceCenter PSTN Gateway
Страница 1: ......