10
D-Link DVX-000MS User Manual
Section - Installation
Logging On to Assistant
You log on to the Assistant program by specifying the extension number, password, and base unit to which you want
to connect. Most offices have only one base unit, which will appear automatically in the Base unit list. However, if you
want to choose another base unit that is connected to your office LAN, you do so when logging on to Assistant.
Note:
The first time you log on, you will be asked to accept a security certificate from the manufacturer of the base unit.
It reports a MAC address and asks you to compare it to the MAC address located on the sticker affixed to the bottom
of the device. If you have access to the base unit, you can do the comparison. If not, accept the certificate, or contact
the phone system administrator for assistance.
To start Assistant and log on:
1. On the
Start
menu, point to
All Programs
, and then click
Microsoft Response Point Assistant
.
2. In the
Extension number
box, type your extension number.
3. In the
Password
box, type the password for this extension number. The password you set is also used to access
your voicemail. If you haven’t yet changed it, the default password is 9999.
4. In the
Base unit
list, click the base unit on your office LAN.
5. Select the
Remember logon settings
check box, if you want.
6. Click
Log On
.
Содержание DVG-3104MS - VoiceCenter PSTN Gateway
Страница 1: ......