D-Link DSA 5100 - Airspot - Gateway, Руководство пользователя

Страница: 17 / 93

17
Using the Configuration Utility (continued)
System Configuration > WAN1 Configuration > Static IP Mode
Enter the IP address provided to you by your ISP (Required).
IP address:
Enter the subnet mask provided to you by your ISP. All
devices on the network must share the same subnet
mask (Required).
Subnet
mask:
Enter the gateway IP address provided to you by your
ISP (Required).
Default
Gateway:
Static IP
Address:
Enter the IP address of the primary DNS server
(Required).
Primary
DNS
Server:
Enter the IP address of the secondary DNS server
(Optional).
Secondary
DNS
Server:
This device can be configured in Bridge mode. All
interfaces bind to the same IP. Only one set of IP
addresses can be used for management. The advantage
is that there is no need to readjust any network
infrastructure, just plug and use. When you click Enable,
the VLAN function of the Public LAN is disabled.
Bridge
Mode:
Note: WAN1 must have a static IP address in order to utilize the 802.3ad WAN link
aggregation feature. If you cancel the static IP address, then the option of choice for
802.3ad is also canceled. (Please see the WAN2 configuration that follows for
information on configuring 802.3ad.)