D-Link DSA-3600, Руководство пользователя

Страница: 19 / 204

Chapter 4.1 System
13
ƒ
Management IP Address List:
Set the IP addresses within a range which the administrator can use to connect
to the web management interface of DSA-3600 via its WAN and/or LAN ports. The administrator can grant the
access of the web management interface by specifying a list specific IP address or ranges of IP addresses, no
matter the access is from WAN or LAN port. For example, entering “192.168.3.1” and “192.168.1.0/24” means
the computer at 192.168.3.1 and the computers the range of 192.168.1.0 to 192.168.1.255 are able to reach the
web management interface.
Please Note: While the default IP address of Network Interface is changed at System
Æ
Service Zones
Æ
Basic
Settings
Æ
DHCP Server
Æ
Enable DHCP Server, the management IP address has to be setup again from default
IP address to the new IP as the format, x.x.x.x/x.
y
SNMP:
The DSA-3600 supports SNMPv2. When the function is enabled, an implemented SNMP server is able
to access the system’s management information base.
y
HTTPS Protected Login:
The system supports HTTPS (encrypted) and HTTP (non-encrypted) when clients log
into the system. When this function is enabled, the Secured Socket Layer (SSL) will be activated and
implemented to the web-based user login page.
y
Time:
The system time can be set up manually or synchronized with remote NTP (Network Time Protocol)
servers. It supports up to five NTP servers. When
NTP
is enabled, at least one NTP server has to be configured
and the system time will be adjusted automatically according to the remote NTP servers. When manually set up
is enabled, the administrator needs to set configurations manually. The system time can also be manually
configured when selecting
Manually set up
. Please enter the date and time into the respective fields.