D-Link DSA-3600, Руководство пользователя

Страница: 12 / 204

Chapter 3. Hardware Installation
6
3.2 Package Contents
The standard package of the DSA-3600 includes:
y DSA-3600 x 1
y
Quick Install Guide x 1
y CD-ROM x 1
y Console Cable x 1
y Straight-through Ethernet Cable x 1
y Power Cord x 1
y
Power Adapter x 1
3.3 System Requirement
y
Standard 10/100BaseT including network cables with RJ-45 connectors
y All PCs need to install the TCP/IP network protocol
3.4 Installation Steps
Please follow the steps mentioned below to install the hardware of DSA-3600:
1.
Connect the power adapter to the power socket on the rear panel. The Power LED on the front panel should be
ON to indicate a proper connection.
Warning: Using a non-certified power adapter may damage this product.
2.
Connect an Ethernet cable to the WAN1 Port on the rear panel. Connect the other end of the Ethernet cable to
a networking device such as an ADSL modem, a cable modem, a switch, or a hub. The LED of WAN1 port
should light up to indicate a proper connection.
3.
Connect an Ethernet cable to any LAN Port on the rear panel. Connect the other end of the cable to a
networking device such as the administrator’s PC. The LED of the LAN should be ON to indicate a proper
connection.
After the hardware of the DSA-3600 is installed completely, the system is ready to be configured in the following
sections. This manual will guide you step by step to set up the system using a single DSA-3600 to manage the
network.