D-Link DSA-3600, Руководство пользователя

Страница: 31 / 204

Chapter 4.1 System
25
Figure-4.1.5a: An example using Tag-Based service zones
y
Port-Based:
For port-based service zone, each LAN port can be assigned to a service zone since a LAN port can be mapped
to a VLAN tag. The mapping between the ports and the service zones are many-to-one. With factory default
setting, all ports belong to the Default service zone and other 4 service zones are gray-out. The other 4 service
zones will appear after the specific service zone is configured as enabled in System--Service Zones
.
¾
Port-Based Service Zones Configuration Example
After running through
Setup Wizard
on a factory default system, the DSA-3600 is ready to use the default
tag-based VLAN for separating networks.
Log in to the web management interface and enter
“admin”
for both the default username and password in
the Username and Password fields of the Administrator Login Page. After logging-in the web management
interface, from the Menu Tree, click
System
then
Service Zones
to enter the Service Zone Settings page.
Click
Configure
of the desired service zone to enter its Basic Settings page, and then enable the service zone
used for port-based service zone deployment.
Click
System
from the Menu Tree and then click
LAN Port Mapping
. Select
Port-Based
mode for service
zone.