D-Link DSA-3600, Руководство пользователя

Страница: 94 / 204

Chapter 4. Web Interface Configuration
88
the Server. The embedded memory can only have up to 300 logs.
Properties
¾
SSID Broadcast:
Select this option to enable the SSID to broadcast in your network. When configuring
the network, it is suggested to enable this function but disable it when the configuration is complete.
With this enabled, someone could easily obtain the SSID information with the site survey software and
get unauthorized access to a private network. With this disabled, network security is enhanced and can
prevent the SSID from being seen on networked.
¾
Data Rate:
The default is
Auto
. Available range is from 1 to 54Mbps. The rate of data transmission
should be set depending on the speed of the wireless network. Select from a range of transmission
speed or keep the default setting,
Auto
, to make the Access Point automatically use the fastest rate
possible.
¾
Fragment Length:
The fragmentation threshold determines whether packets will be fragmented. Enter
a value between 256 and 2346.
¾
RTS Length:
Enter a value between 256 and 2346. When wireless clients would like to send a packet
which is larger than this value, it transmits an RTS and waits for reply.
¾
Beacon Interval (ms):
Enter a value between 20 and 1000 msec. The default value is 100 milliseconds.
The entered time means how often the beacon signal transmission between the access point and the
wireless network. Beacons are packets sent by an access point to synchronize a network. Specify a
beacon interval value.
¾
DTIM:
Delivery Traffic Indication Message. Enter a value between 1 and 255. DTIM is a countdown
informing clients of the next window for listening to broadcast and multicast messages.
¾
Preamble:
Select Long Only or Short and Long. A short preamble is recommended for high-traffic
networks.
¾
Transmit Power:
Choose full, half (-3dB), 1quarter (-6dB), eighth (-9dB), minimum power.
¾
WMM:
WMM stands for Wi-Fi Multimedia, by enabling this feature. It will improve the user experience
for audio and video applications over a Wi-Fi network.
¾
Load Balance:
When enabled, you allow several APs to balance wireless network traffic and wireless
clients among APs in the networks. Assign each access point a different non-overlapping channel.
o
User Limit:
Enter the number of the limit of load balancing users from 0~64.
¾
Link Integrate:
Enable or disable the feature.
¾
Internal Station Connection:
Select either Enabled or Disabled. The connection allows clients to
communicate with each other when enabled. If this is disabled, wireless stations of the selected band
are not allowed to exchange data through the access point.
Access Control by MAC Address:
This function provides to control the clients’ devices that are allowed to
associate with the APs applied with the desired template setting. Choose
Disabled
or
Enabled
in the
Status
column and enter the desired clients’ MAC addresses in the MAC Address List. When this function
is enabled, please make sure the MAC Address List is not empty.