D-Link dgs-8000 SERIES, Руководство по установке оборудования, Страница: 52 / 97

DGS-8000 Series Hardware Installation Guide Chapter 3 Switch Installation
45
3.6
Installing and Removing the
Plastic Dust Cap of a Switching
Power Supply
Plastic dust caps for the system switching power supply module, host management module,
and service module on the DGS-8000 need to be configured.
3.6.1
Installing and Removing the Air
Filter of a System Switching
Power Supply
The simple steps for installing the plastic dust cap of the 8000-1400AC/8000-2000AC are as
follows:
(1) Press the buckle on the plastic dust cap of the switching power supply and take the
plastic part.
(2) Install the plastic dust cap of the switching power supply.
(3) Finish installing the plastic part.
The simple steps for removing the plastic dust cap of the 8000-1400AC/8000-2000AC are as
follows:
(1) Press the buckle on the plastic dust cap of the switching power supply and take the
plastic part.
(2) Remove the plastic dust cap of the switching power supply.
(3) Finish removing the plastic part.
Figure 3-1 Location for installing the air filter of the 8000-1400AC/8000-2000AC