-
ix
In the following example, the user enters the
enable privilege
LEVEL
command in user EXEC mode to
enter privileged EXEC mode at Power User level:
Privileged EXEC Mode at Administrator Level
This command mode has a privilege level of 15. Users logged in with this command mode can monitor all
system information and change any system configuration settings mentioned in this Configuration Guide.
There are two methods that a user can use to enter privileged EXEC mode at administrator level. The first
method is to login to the Switch with a user account that has a privilege level of 15. The second method
requires a user to login to the Switch in as a user with an advanced user or power user level and and use
the
enable privilege
LEVEL
command.
In this command mode, the user can return to user EXEC mode at an advanced user level by entering the
disable
command.
In the following example, the user is currently logged in as an administrator in privileged EXEC mode and
uses the
disable
command to return to user EXEC mode at an advanced user level:
User Access Verification
Username: power-user
Password:
DGS-6604 Chassis-based High-Speed Switch
Command Line Interface
Firmware: 2.00.001
Copyright (c) 2010 D-Link Corporation. All rights reserved.
DGS-6604:12#
DGS-6604:2>enable privilege 12
DGS-6604:12#
DGS-6604:15#disable
DGS-6604:2>
