DGS-6604
m
set weight
CLI Reference Guide
565
set weight
To specify the BGP weight for the routing table, use the
set weight
command in
route-map configuration mode. To delete an entry, use the
no
form of this
command.
set weight
NUMBER
no set weight
NUMBER
Default
Disabled
Command Mode
Route-map configuration
Usage Guideline
The implemented weight is based on the first matched autonomous system path.
Weights indicated when an autonomous system path is matched override the
weights assigned by global neighbor commands. In other words, the weights
assigned with the set weight route-map configuration command override the
weights assigned using the neighbor weight command.
Example
This example shows how to add the policy routing entry with name myPolicy and
set the weight to 30 when it match the as-path access list with PATH_ACL:
Verify the settings by entering the
show route-map
command.
Syntax Description
NUMBER
Weight value. It can be an integer ranging from 0 to 65535.
Switch(config)# route-map myPolicy permit 1
Switch(config-route-map)# match as-path PATH_ACL
Switch(config-route-map)# set weight 30
