D-Link DGS-3312SR, Руководство по эксплуатации продукта, Страница: 173 / 244

DGS-3312SR Gigabit Layer 3 Switch
An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to the
Switch’s SNMP agent.
An MIB view that defines the subset of all MIB objects that will be accessible to the SNMP community.
Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
Figure 7- 12. SNMP Community Table Configuration window
The following parameters can set:
Parameter Description
Community Name
Type an alphanumeric string of up to 33 characters that is used to identify members
of an SNMP community. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch’s SNMP agent.
View Name Type an alphanumeric string of up to 32 characters that is used to identify the group
of MIB objects that a remote SNMP manager is allowed to access on the Switch. The
view name must exist in the SNMP View Table.
Access Right
Read_Only
−
Specifies that SNMP community members using the community string
created with this command can only read the contents of the MIBs on the Switch.
Read_Write
−
Specifies that SNMP community members using the community string
created with this command can read from and write to the contents of the MIBs on
the Switch.
SNMP Host Table
Use the SNMP Host Table to set up SNMP trap recipients.
Open the Management folder, and then the SNMPV3 folder. Finally, click on the SNMP Host Table link. This will open
the SNMP Host Table window, as shown below.
To delete an existing SNMP Host Table entry, click the corresponding X icon under the Delete heading.
160