D-Link DGS-3312SR, Руководство по эксплуатации продукта

Страница: 164 / 244

DGS-3312SR Gigabit Layer 3 Switch
To set the Local Enable Password, set the following parameters and click Apply .
Parameter Description
Old Local Enable If a password was previously configured for this entry, enter it here in order to change
it to a new password
New Local Enable Enter the new password that you wish to set on the Switch to authenticate users
attempting to access Administrator Level privileges on the Switch. The user may set a
password of up to 15 characters.
Confirm Local
Enable Confirm the new password entered above. Entering a different password here from
the one set in the New Local Enabled field will result in a fail message.
Enable Admin
This window is for users who have logged on to the Switch on the normal user level, and wish to be promoted to the
administrator level. After logging on to the Switch, users will have only user level privileges. To gain access to
administrator level privileges, the user will open this window and will have to enter an authentication password. Possible
authentication methods for this function include RADIUS, TACACS, , and XTACACS, local enable (local
account on the switch), or no authentication (none). Because XTACACS and TACACS do not support the enable function,
the user must create a special account on the server host, which has the username “enable”, and a password configured by
the administrator that will support the enable function. This function becomes inoperable when the authentication policy is
disabled.
To view the following window, click Security > Access Authentication Control > Enable Admin :
Figure 6- 21. Enable Admin window
When this window appears, click the Enable Admin button revealing a dialog box for the user to enter authentication
(password, username), as seen below. A successful entry will promote the user to Administrator level privileges on the
switch.
151