53
D-Link DGL-5500 User Manual
Section 3 - Configuration
Admin
This page will allow you to change the Administrator password, system name, remote management, and time settings.
Maintenance
Enter a new password for the Admin login name. Enter again to
verify password.
Enter a name for your router.
Enables a challenge-response test to require users to type letters
or numbers from a distorted image displayed on the screen to
prevent online hackers and unauthorized users from gaining
access to your router’s network settings.
Check to enable HTTPS to connect to the router securely. This
means to connect to the router, you must enter
https
://192.168.0.1
(for example) instead of
http
://192.168.0.1
.
Remote management allows the DGL-5500 to be configured
from the Internet by a web browser. A username/password is still
required to access the Web Management interface.
The port number used to access the DGL-5500 is used in the URL. Example:
http://x.x.x.x:8080
whereas x.x.x.x is the Internet IP address
of the DGL-5500 and 8080 is the port used for the Web Management interface.
If you have enabled
HTTPS Server,
you must enter
https://
as part of the URL to access the router remotely.
This section will list any rules that are created. You may click the
Edit
icon to change the settings or enable/disable the rule, or click the
Delete
icon to remove the rule.
Details
will display the current remote admin filter.
Admin
Password:
Gateway Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Port:
Remote Admin
Inbound Filter: