25
D-Link DGL-5500 User Manual
Section 3 - Configuration
Select
Dynamic IP (DHCP)
to obtain IP Address information
automatically from your ISP. Select this option if your ISP does not
give you any IP numbers to use. This option is commonly used for
cable and some DSL services.
The Host Name is optional but may be required by some ISPs.
Leave blank if you are not sure.
Check the box if you are having problems obtaining an IP address
from your ISP.
Enter the Primary and secondary DNS server IP addresses assigned
by your ISP. These addresses are usually obtained automatically
from your ISP. Leave blank if you did not specifically receive these
from your ISP.
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP. 1500 is the default
MTU.
The default MAC Address is set to the Internet port’s physical
interface MAC address on the router. It is not recommended that
you change the default MAC address unless required by your ISP.
You can use the
Copy Your PC’s MAC Address
button to replace
the Internet port’s MAC address with the MAC address of your
Ethernet card.
My Internet
Connection:
Host Name:
MAC Address:
Internet Setup
Dynamic (Cable)
Primary/Secondary
DNS Server:
MTU:
Use Unicasting:
