12
D-Link DGL-5500 User Manual
Section 2 - Installation
5. Under
Router Settings
, enter an available IP address and the subnet mask of your network. Click
Save Settings
to save your
settings and then click
Restart Now
. You will need to use this new IP address to access the configuration utility of the router
in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the
LAN
ports of the router and connect it to your other router. Do not plug anything
into the Internet (WAN) port of the D-Link router.
8. You may now use the other three LAN ports to connect other Ethernet devices and computers. To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the
Configuration
section for
more information on setting up your wireless network.