49
D-Link DGL-5500 User Manual
Section 3 - Configuration
Select
Turn MAC Filtering Off
,
Turn MAC Filtering ON and ALLOW
computers listed to access the network
, or
Turn MAC Filtering
ON and DENY computers listed to access the network
from the
drop-down menu.
Enter the MAC address of the computer or device you would like
to filter.
To find the MAC address on a computer, please refer to the
Networking Basics
section in this manual.
Select a DHCP client from the drop-down menu and click
<<
to
copy that MAC Address.
Click
Save
to save your entry.
Click
Clear
to erase your current entry.
This section will list your current entries.
Note:
If you enable filtering and create an “allow” list, you must add
the computer or device you are currently using to the list or you will be
blocked when the router reboots.
Configure MAC
Filtering:
MAC Address:
DHCP Client List:
Save:
Clear:
MAC Filter List:
Use MAC Filters to allow or deny local computers/devices by their MAC addresses from accessing the network. You can either
manually add a MAC address or select the MAC address from the list of clients that are currently connected to the router.
MAC Filtering Rules
