D-Link DGE-560SX User Guide
95
The subsystem ID.
Testing the Network
The
Network Test
option on the
Diagnostics
tab lets you verify IP network connectivity.
This test verifies if the driver is installed correctly and tests connectivity to a gateway or other
specified IP address on the same subnet. The network test uses TCP/IP to send ICMP packets
to remote systems, then waits for a response.
Note: The network test option is not available on adapters that are grouped into a team
(see Configuring Teaming).
To run the network test
1.
Click the name of the adapter to test in the Explorer View pane.
2.
From the
Select a test to run
list, select
Network Test
. If the
Network Test
option is not available, then from the
Context View
tab on the right side of the
window, select
Diagnostics
and then select
Network Test
.
3.
To change the destination IP address, select
IP address to ping
. In the Network Test
window, enter a Destination IP address, then click
OK
.
4.
Click
Test
.
The results of the network test are displayed in the
Status
field.
