D-Link DGE-560SX User Guide
109
5.
From the
Available Adapters
list, click the adapter you want to add to the team and
then click
Add
. Remove team members from the
Team Members
list by clicking the
adapter and then clicking
Remove
. Click
Next
.
Note: There must be at least one Broadcom network adapter assigned to the
team.
The TCP Offload Engine (TOE), Large Send Offload (LSO) and Checksum Offload
(CO) columns indicate if the TOE, LSO, and/or the CO properties are supported for
the adapter. The TOE, LSO, and CO properties are enabled for a team only when
all of the members support and are configured for the feature. If this is the case,
then the team offload capabilities appear on the bottom of the screen.
Note: Adding a network adapter to a team where its driver is disabled may
negatively affect the offloading capabilities of the team. This may have an impact on
the team's performance. Therefore, it is recommended that only driver-enabled
network adapters be added as members to a team.
