D-Link DGE-560SX User Guide
20
Chapter 3: Installing the Driver
Software
3.1 Creating a Driver Disk
Create driver disks using the Broadcom MakeDisk utility (Setup.exe file). This utility runs
under Windows and allows you to create disks with the following drivers:
Windows Server 2003 (IA32, IA64, X64 (AMD64))
NetWare 5.x/6
NetWare BASP
MS-DOS Open Data-Link Interface (ODI)
To create a driver disk or file
1.
Insert a 3.5-inch disk into drive A (default) or create a folder on your hard disk.
2.
Insert the installation CD into your system CD-ROM drive.
3.
If the CD does not automatically run, then browse to the MakeDisk folder on the CD
and double-click
Setup.exe
.
4.
Follow the onscreen instructions.
5.
Select the driver or drivers of choice. Note that selecting multiple drivers results in
creating multiple disks.
6.
Click
Next
.
7.
Click
OK
.
8.
If more than one driver was selected,
Setup Needs the Next Disk
is displayed
again. Insert another 3.5-inch disk or browse to another folder and click
OK
.
When all driver disks have been created, an information screen is displayed confirming that
the disks were successfully created. Click
OK
.
3.2 Broadcom Boot Agent Driver Software
