D-Link DGE-560SX User Guide
26
To boot in DOS mode and connect to a network for the DOS environment, download the Intel
PXE PDK from the Intel website. This PXE PDK comes with a TFTP/ProxyDHCP/Boot server.
The PXE PDK can be downloaded from Intel at
http://downloadcenter.intel.com/default.aspx
.
3.3 NDIS2 Driver Software
3.3.1 Preinstallation Requirements
Before you can successfully install the NDIS2 driver software, the Broadcom network adapter
must be physically installed in the server. Networking software that is appropriate to the
operating system (such as Microsoft LAN Manager 2.2 for MS-DOS) must already be running
on your server.
3.3.2 Installing the NDIS2 Driver Software for Use on
MS-DOS Platforms
The NDIS2 driver software can be run from an MS-DOS startup disk using Microsoft Network
Client 3.0 or from the hard disk using Microsoft LAN Manager 2.2.
Creating a Startup Disk to Run Microsoft Network
Client
To perform this installation you must have the following items:
Windows NT Server 4.0 CD-ROM
A blank MS-DOS system disk (3.5" high-density floppy disk)
Access to the Broadcom NDIS2 driver file (B57.dos). This file is located on the
installation CD.
NOTES:
o
Windows NT Server 4.0 users.
When running
Setup for Microsoft
Network Client v3.0 for MS-DOS
, click any network card from the list
(
NE2000 Compatible
, for example) to create the startup disk.
o
After creating the startup disk, follow the instructions in
Modifying the Startup
Disk
.
