D-Link DGE-560SX Скачать руководство пользователя страница 39

Страница: 39 / 149

D-Link DGE-560SX User Guide



Source RPM (tg3-

version

.src.rpm)



Supplemental (tg3_sup-

version

.tar.gz)



Compressed tar (tg3-

version

.tar.gz)

Identical source files to build the driver are included in both RPM and TAR source packages.

The tar file contains additional utilities such as patches and driver disk images for network

installation.

3.5.3 Installing TG3 Driver Software

Installing the Source RPM Package

Install the source RPM package.

rpm -ivh tg3-

version

.src.rpm

Change the directory to the RPM path and build the binary driver for your kernel (the

RPM path is different for different Linux distributions).

cd /usr/src/redhat,OpenLinux,turbo,packages,rpm ...

rpm -bb SPECS/tg3.spec or rpmbuild -bb SPECS/tg3.spec
rpmbuild -bb SPECS/tg3.spec (for RPM version 4.x.x)

NOTE: During your attempt to install a source RPM package, the following

message may be displayed:

error: cannot create %sourcedir /usr/src/redhat/SOURCE

The most likely cause of the error is that the rpm-build package has not been

installed. Locate the rpm-build package on the Linux installation media and

install it using the following command:

rpm -ivh rpm-build-version.i386.rpm

Complete the installation of the source RPM.

Install the newly-built package (driver and man page).

rpm -ivh RPMS/i386/tg3-

version

.i386.rpm

Depending on the kernel, the driver is installed to one of the following paths:

Содержание DGE-560SX






















































































































































Результаты поиска

Содержание DGE-560SX

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGE-560SX, Руководство пользователя

Результаты поиска

Содержание DGE-560SX

Отзывы:

Бренды по названию

Популярные бренды