D-Link DFL-1100 - Security Appliance Скачать руководство пользователя страница 72

Страница: 72 / 144

Dynamic DNS

The

Dynamic DNS

(requires Dynamic DNS Service) allows you to alias a dynamic IP

address to a static hostname, allowing your device to be more easily accessed by a specific
name. When this function is enabled, the IP address in Dynamic DNS Server will be
automatically updated with the new IP address provided by ISP.

Click DynDNS in the Tools menu to enter Dynamic DNS configuration.

The firewall provides a list of a few predefined DynDNS service providers. Users must

Add Dynamic DNS Settings

Follow these steps to enable Dynamic DNS.

Step 1.

Go to Tools and DynDNS.

Step 2.

Choose what Dynamic DNS service you would like to use, and fill in the required

information, username and password in all cases and domains in all but cjb.net.

Click the

Apply

button below to apply the settings or click

Cancel

to discard changes.

Содержание DFL-1100 - Security Appliance

















































































































































Результаты поиска

Содержание DFL-1100 - Security Appliance

Отзывы:

D-Link DFL-1100 - Security Appliance, Руководство пользователя, Страница: 72 / 144

Результаты поиска

Содержание DFL-1100 - Security Appliance

Отзывы: