14
Add Read-only access to an interface
To add read-only access, click on the interface you would like to add it to. Note that if you
only have read-only access enabled on an interface, all users will only have read-only access,
even if they are administrators.
Follow these steps to add read-only access to an interface.
Step 1.
Click on the interface you would like to add it to.
Step 2.
Enable the
Read-only
checkbox.
Step 3.
Specify which network addresses should be allowed read-only access to the
interface, for example 192.168.1.0/24 for a whole class C network or 172.16.0.1 –
172.16.0.10 for a range of IP addresses.
Step 4.
Specify protocol to be used to access the DFL-1100 via the dropdown menu.
Select
HTTP and HTTPS
(Secure HTTP) or
HTTPS only
.
Click the
Apply
button below to apply the settings or click
Cancel
to discard changes.
Example:
Enable SNMP access to an interface
Follow these steps to add read-only SNMP access to an interface.
Step 1.
Click on the interface you would like to add it to.
Step 2.
Enable the
Read-only
checkbox.
Step 3.
Specify which network addresses should be allowed to receive SNMP traps, for
example 192.168.1.0/24 for a whole class C network or 172.16.0.1 – 172.16.0.10 for a
range of IP addresses.
Step 4.
Specify the community string used to authenticate the DFL-1100.
Click the
Apply
button below to apply the settings or click
Cancel
to discard changes.
Example:
Содержание DFL-1100 - Security Appliance
