To accomplish this we need to create the following firewall settings:
-
Configure two static routes (one for each public IP we wish to forward)
-
Create two port mappings (one for each public IP mapping to each private Server)
Routing configuration:
Static Route Configuration for a Server on the LAN:
Navigate to the
SYSTEM
tab, then the
ROUTING
page of the Web-based configuration.
Select the
Add New
link to create the first static route.
Select the Interface that the Internal Server is connected to (
LAN
or
DMZ
).
Specify the Public IP to be forwarded in the
Network
field.
The
Subnet Mask
should be set to 255.255.255.255 (1-host).
Enable the
Proxy ARP
feature.
The above static route configuration explicitly defines the interface that the additional
Public IP address should be forwarded to.
Содержание DFL-1100 - Security Appliance
