D-Link DFL-1100 - Security Appliance Скачать руководство пользователя страница 69

Страница: 69 / 144

Enable DHCP Server

To enable the DHCP Server on an interface, click on

Servers

in the menu bar, and then

click

DHCP Server

below it.

Follow these steps to enable the DHCP Server on the LAN interface.

Step 1.

Choose the LAN interface from the Available interfaces list.

Step 2.

Enable by checking the

Use built-in DHCP Server

box.

Step 3.

Fill in the IP Span, the start and end IP for the range of IP addresses that the DFL-

1100 can assign.

Step 4.

Fill in the DNS servers the DHCP server will assign to the clients; at least one

should be provided. If the DNS Relay function is configured, the DHCP server will assign
those addresses.

Step 5.

Optionally type in the WINS servers the DHCP server will assign to the clients.

Step 6.

Optionally type in the domain that the DHCP server will assign to the clients.

Step 7.

Choose the length of time the DHCP server will give out leases before the client

has to renew them.

Click the

Apply

button below to apply the settings or click

Cancel

to discard changes.

Enable DHCP Relay

To enable the DHCP Relay on an interface, click on

Servers

in the menu bar, and then

click

DHCP Server

below it.

Follow these steps to enable the DHCP Relay on the LAN interface.

Step 1.

Choose the LAN interface from the Available interfaces list.

Step 2.

Enable by checking the

Relay DHCP Requests to other DHCP server

box.

Step 3.

Fill in the IP of the DHCP Server; note that it should be on another interface than

where the DHCP request is coming from, i.e. a server on the DMZ.

Click the

Apply

button below to apply the settings or click

Cancel

to discard changes.

Disable DHCP Server/Relay

To disable the DHCP Server on an interface, click on

Servers

in the menu bar, and then

click

DHCP Server

below it. Select the interface on which you wish to disable the DHCP

server or relayer.

Follow these steps to disable the DHCP Server or Relayer on the LAN interface.

Step 1.

Choose the LAN interface from the Available interfaces list.

Step 2.

Disable by checking the

No DHCP processing

box.

Click the

Apply

button below to apply the settings or click

Cancel

to discard changes.

Содержание DFL-1100 - Security Appliance

















































































































































Результаты поиска

Содержание DFL-1100 - Security Appliance

Отзывы:

Бренды по названию

Популярные бренды

D-Link DFL-1100 - Security Appliance, Руководство пользователя

Результаты поиска

Содержание DFL-1100 - Security Appliance

Отзывы:

Бренды по названию

Популярные бренды