Schedules
It is possible to
configure a schedule
for policies to take
effect. By creating a
schedule, the DFL-
1100 allows the
firewall policies to be
used only at those
designated times.
Any activities outside
of the scheduled time
slot will not follow the
policies and therefore
will not likely be
permitted to pass
through the firewall.
The DFL-1100 can be
configured to have a
start time and stop
time, as well as 2
different time periods
in a day. For example,
an organization may
only want the firewall
to allow the internal
network users to
access the Internet during work hours. Therefore, one may create a schedule to
allow the firewall to allow traffic Monday-Friday, 8AM-5PM only. During the non-work
hours, the firewall will not allow Internet access.
Add new recurring schedule
Follow these steps to add a new recurring schedule.
Step 1.
Go to Firewall and Schedules and choose Add new.
Step 2.
Enable the checkbox named Recurring scheduling.
Step 3.
Use the checkboxes to set the times this schedule should be active.
Click the
Apply
button below to apply the changes or click
Cancel
to discard changes.
Содержание DFL-1100 - Security Appliance
