D-Link DFL-1100 - Security Appliance Скачать руководство пользователя | Manualshive

Страница: 53 / 144

background image

Protocol-independent settings

Allow ICMP errors from the destination to the source

– ICMP error messages are sent

in several situations: for example, when an IP packet cannot reach its destination. The
purpose of these error control messages is to provide feedback about problems in the
communication environment.

However, ICMP error messages and firewalls are usually not a very good combination; the

ICMP error messages are initiated at the destination host (or a device within the path to the
destination) and sent to the originating host. The result is that the ICMP error message will be
interpreted by the firewall as a new connection and dropped, if not explicitly allowed by the
firewall rule-set. It is generally not a good idea to allow any inbound ICMP message to be able
to have those error messages forwarded.

To solve this problem, the DFL-1100 can be instructed to pass an ICMP error message

only if it is related to an existing connection. Check this option to enable this feature for
connections using this service.

ALG

– Similar to the way most stateful inspection firewalls behave, the DFL-1100 filters

only information found in packet headers, such as IP, TCP, UDP, or ICMP headers.

In some situations though, filtering only header data is not sufficient. The FTP protocol, for

instance, includes IP address and port information in the protocol payload. In these cases, the
firewall needs to be able to examine the payload data and carry out appropriate actions. The
DFL-1100 provides this functionality using Application Layer Gateways (ALG).

To use an Application Layer Gateway, the appropriate Application Layer Gateway

definition is selected in the dropdown menu. The selected Application Layer Gateway will thus
manage network traffic that matches the policy using this service.

Currently, the DFL-1100 supports two Application Layer Gateways, one is used to manage

the FTP protocol and the other one is a HTTP Content Filtering ALG. For detailed information
about how to configure the HTTP Application Layer Gateway, please see the Content Filtering
chapter.

«
...
51
52
53
54
55
...
»

Содержание DFL-1100 - Security Appliance

















































































































































Отзывы:

Нет отзывов

Похожие инструкции для DFL-1100 - Security Appliance

Бренд: Advantech Страницы: 25

Бренд: IBASE Technology Страницы: 16

ProSAFE FVS318G v2

Бренд: NETGEAR Страницы: 2

Бренд: Fujitsu Страницы: 72

Бренд: Black Box Страницы: 19

Бренд: Net-Blocker Страницы: 2

Бренд: Hawking Страницы: 2

FortiGate FortiGate-5001

Бренд: Fortinet Страницы: 2

FortiGate FortiGate-3600A

Бренд: Fortinet Страницы: 2

FortiGate FortiGate-400

Бренд: Fortinet Страницы: 2

FortiGate FortiGate-310B

Бренд: Fortinet Страницы: 2

FortiGate FortiGate-30B

Бренд: Fortinet Страницы: 2

FortiGate ASM-CX4

Бренд: Fortinet Страницы: 1

FortiGate FortiGate-300

Бренд: Fortinet Страницы: 2

FortiGate FortiGate-5001A

Бренд: Fortinet Страницы: 38

FortiGate FortiGate-5005-DIST

Бренд: Fortinet Страницы: 38

Бренд: Fortinet Страницы: 23

FortiGate FortiGate-50

Бренд: Fortinet Страницы: 240

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды