D-Link DES-3550 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 192

D-Link DES-3550 Скачать руководство пользователя страница 71

DES-3550 Layer 2

Fast Ethernet Switch User’s Guide

71

The following fields can be set:

Parameter

Description

From/To

These two fields allow you to specify the range of ports that will be included
in the Port-based VLAN that you are creating using the

802.1Q Port

Settings

page.

PVID

The read only field in the

GVRP Table

shows the current PVID assignment

for each port. The Switch’s default is to assign all ports to the Default VLAN
with a VID of 1.

The PVID is used by the port to tag outgoing, untagged packets, and to
make filtering decisions about incoming packets. If the port is specified to
accept only tagged frames as tagging, and an untagged packet is forwarded
to the port for transmission, the port will add an 802.1Q tag using the PVID to
write the VID in the tag. When the packet arrives at its destination, the
receiving device will use the PVID to make VLAN forwarding decisions.

If a packet is received by the port, and Ingress filtering is enabled, the port
will compare the VID of the incoming packet to its PVID. If the two are
unequal, the port will drop the packet. If the two are equal, the port will
receive the packet.

GVRP

The

Group VLAN Registration Protocol (GVRP)

enables the port to

dynamically become a member of a VLAN.

GVRP

is disabled by default.

Ingress

This field can be toggled using the space bar between

Enabled

and

Disabled

.

Enabled

enables the port to compare the VID tag of an incoming

packet with the PVID number assigned to the port. If the two are different,
the port filters (drops) the packet.

Disabled

disables Ingress filtering. Ingress

Checking is disabled by default.

Acceptable Frame
Type

This field denotes the type of frame that will be accepted by the port. The
user may choose between

Tagged Only,

which means only VLAN tagged

frames will be accepted, and

Admit_All,

which means

both tagged and

untagged frames will be accepted.

Admit_All

is enabled by default.

Click

Apply

to implement the changes made.

Port Bandwidth

The bandwidth control settings are used to place a ceiling on the transmitting and receiving
data rates for any selected port. In the

Configuration

folder, click

Port Bandwidth

, to view

the screen shown below.

«
...
69
70
71
72
73
...
»

Содержание DES-3550

































































































































































































Отзывы:

Нет отзывов