DES-3550 Layer 2
Fast Ethernet Switch User’s Guide
40
Setting the Switch’s IP Address using the Console Interface
Each Switch must be assigned its own IP Address, which is used for communication with an
SNMP network manager or other TCP/IP application (for example BOOTP, TFTP). The
Switch’s default IP address is 10.90.90.90. You can change the default Switch IP address to
meet the specification of your networking address scheme.
The IP address for the Switch must be set before it can be managed with the Web-based
manager. The Switch IP address can be automatically set using BOOTP or DHCP protocols,
in which case the actual address assigned to the Switch must be known.
The IP address may be set using the Command Line Interface (CLI) over the console serial
port as follows:
Starting at the command line prompt, enter the commands
config ipif System ipaddress
xxx.xxx.xxx.xxx/yyy.yyy.yyy.yyy
. Where the
x
’s represent the IP address to be assigned to
the IP interface named
System
and the
y
’s represent the corresponding subnet mask.
Alternatively, you can enter
config ipif System ipaddress xxx.xxx.xxx.xxx/z
. Where the
x
’s
represent the IP address to be assigned to the IP interface named
System
and the
z
represents
the corresponding number of subnets in CIDR notation.
The IP interface named
System
on the Switch can be assigned an IP address and subnet mask,
which can then be used to connect a management station to the Switch’s Telnet or Web-based
management agent.
The system message
Success
indicates that the command was executed successfully. The
Switch can now be configured and managed via Telnet and the CLI or via the Web-based
management agent using the above IP address to connect to the Switch.
Switch Information
Click the
Switch Information
link in the
Configuration
menu.
The subsections below describe how to change some of the basic settings for the Switch such
as changing IP settings and assigning user names and passwords for management access
privileges, as well as how to save the changes and restart the Switch.
Switch Information
Click the
Switch Information
link in the
Configuration
menu.
Содержание DES-3550
