D-Link DES-3550 Скачать руководство пользователя страница 119 | Manualshive

Страница: 119 / 192

D-Link DES-3550 Скачать руководство пользователя страница 119

DES-3550 Layer 2

Fast Ethernet Switch User’s Guide

119

Switch will accept authentication attempts. Users failing to be
authenticated after the set amount of attempts will be denied access
to the Switch and will be locked out of further authentication
attempts. Command line interface users will have to wait 60 seconds
before another authentication attempt. Telnet and web users will be
disconnected from the Switch. The user may set the number of
attempts from 1 to 255. The default setting is 3.

Click

Apply

to implement changes made.

Application’s Authentication Settings

This window is used to configure switch configuration applications (console, telnet, web) for
login at the user level and at the administration level (

Enable Admin

) utilizing a previously

configured method list.

Figure 7- 6. Application’s Authentication Settings

The following parameters can be set:

Parameter

Description

Application

Lists the configuration applications on the Switch. The user may configure
the

Login Method List

and

Enable Method List

for authentication for users

utilizing the Console (Command Line Interface) application, the Telnet
application, and the WEB (HTTP) application.

Login Method List

Using the pull down menu, configure an application for normal login on the
user level, utilizing a previously configured method list. The user may use the
default Method List or other Method List configured by the user. See the

Login Method Lists

window, in this section, for more information

Enable Method List

Using the pull down menu, configure an application for normal login on the
user level, utilizing a previously configured method list. The user may use the
default Method List or other Method List configured by the user. See the

Enable Method Lists

window, in this section, for more information

Click

Apply

to implement changes made.

Authentication Server Group Settings

This window will allow users to set up

Authentication Server Groups

on the Switch. A server

group is a technique used to group TACACS/XTACACS/ server hosts into user-
defined categories for authentication using method lists. The user may define the type of
server group by protocol or by previously defined server group. The Switch has three built-in

Authentication Server Groups

that cannot be removed but can be modified. Up to eight (8)

authentication server hosts may be added to any particular group.

«
...
117
118
119
120
121
...
»

Содержание DES-3550

































































































































































































Отзывы:

Нет отзывов