D-Link DES-3550 Скачать руководство пользователя страница 165 | Manualshive

Страница: 165 / 192

D-Link DES-3550 Скачать руководство пользователя страница 165

DES-3550 Layer 2

Fast Ethernet Switch User’s Guide

165

Figure 10- 1. SIM Settings window (disabled)

Change the

SIM State

to

Enabled

using the pull down menu and click

Apply

. The screen will

then refresh and the SIM Settings window will look like this:

Figure 10- 2. SIM Settings window (enabled)

The following parameters can be set:

Parameters

Description

SIM State

Use the pull down menu to either enable or disable the SIM state on the
Switch.

Disabled

will render all SIM functions on the Switch inoperable.

Role State

Use the pull down menu to change the SIM role of the Switch. The two
choices are:

Candidate

– A Candidate Switch (CaS) is not the member of a SIM group but

is connected to a Commander Switch. This is the default setting for the SIM
role of the DES-3550.

Commander

– Choosing this parameter will make the Switch a Commander

Switch (CS). The user may join other switches to this Switch, over Ethernet,
to be part of its SIM group. Choosing this option will also enable the Switch
to be configured for SIM.

Discovery Interval

The user may set the discovery protocol interval, in seconds that the Switch
will send out discovery packets. Returning information to a Commander
Switch will include information about other switches connected to it. (Ex. MS,
CaS). The user may set the

Discovery Interval

from 30 to 90 seconds.

Holdtime

This parameter may be set for the time, in seconds that the Switch will hold
information sent to it from other switches, utilizing the

Discovery Interval

. The

user may set the hold time from 100 to 300 seconds.

Click

Apply

to implement the settings changed.

After enabling the Switch to be a

Commander Switch (CS)

, the

Single IP Management

folder will then contain three added links to aid the user in configuring SIM through the web,
including

Topology

,

Firmware Upgrade

, and

Configuration

Backup/Restore

.

«
...
163
164
165
166
167
...
»

Содержание DES-3550

































































































































































































Отзывы:

Нет отзывов